Search
Close this search box.

2000V High-Voltage DC Fuses for Solar, Wind and Energy Storage Systems

Utility-scale solar, wind and battery storage are pushing DC buses beyond 1500V. This guide explains where 2000V DC fuses fit, what to check before specifying one, and how HIITIO’s HCBMG5 and HCHVT2000 fuse families are rated.
Table of Contents

Utility-scale solar and battery storage have spent the past decade moving up the voltage ladder, from 600V to 1000V and then to 1500V DC. An industry white paper from IHS Markit notes that higher system voltages have been a key driver of lower levelized cost of energy for PV, and that voltages such as 2000V or 3000V may allow further savings. The scale of the market explains the interest. The IEA reports that global battery storage additions reached 108 GW in 2025, up around 40% from 2024, with utility-scale projects making up about four-fifths of the total. You can read the details in the IEA’s battery storage commentary. ihsmarkitiea

A higher DC bus voltage puts more demand on every protective device. This guide covers where 2000V DC fuses fit in solar, wind and storage systems, what to check when selecting one, and how HIITIO’s 2000V fuse range is specified.

Why System Voltages Are Moving Beyond 1500V

Raising the DC voltage lets a system carry the same power at lower current. That can mean thinner or fewer conductors, longer PV strings, and more converter capacity in the same footprint. The trade-off is that every component must be rated, tested and certified for the higher voltage.

Certification is where the move gets difficult. Some regions set an upper limit on low-voltage systems, and in Europe the IEC limit for low-voltage systems is 1500V. Equipment makers are working through this step by step. ABB’s three-pole DC switch-disconnector was certified for 2000V photovoltaic systems, a milestone in the utility-scale solar sector’s transition from 1500V to 2000V architecture. The Solar Builder report covers it in more detail. ihsmarkitsolarbuildermag

For fuse specifiers, this shapes the standards question. IEC 60269-4:2024 covers semiconductor fuse-links for circuits up to 1000V AC or 1500V DC, and notes that some fuse-links can use higher rated voltages. The IECEE listing for IEC 60269-4 gives the scope. North American practice differs. CSA states that its harmonized semiconductor fuse standard applies to fuses rated 2000V AC or DC, or less. That standard is trinational with UL 248-13. A 2000V fuse therefore needs a clear statement of which standard it was tested to and which approvals it holds. ieceescc-ccn

What a 2000V DC Fuse Does in a Solar, Wind and Storage System

In a PV-plus-storage plant, DC fuses typically sit in a few places:

  • Battery pack and rack protection. A fuse limits fault current from a large battery string, whose short-circuit energy can be very high.
  • DC bus and inverter or PCS input. Fuses protect converters, DC links and power semiconductors from short-circuit events.
  • Backup protection for DC relays and contactors. If a contactor cannot break a high fault current on its own, an upstream fuse clears it.
  • Disconnect and maintenance points. Fuses are often paired with a DC isolation switch so a circuit can be serviced safely.

Wind power uses the same logic where DC links and storage are present. HIITIO’s 2000V square body fuse product pages carry ESS, EV charging, EV/HEV and wind power tags.

DC fault interruption is harder than AC. There is no natural current zero crossing, so the fuse must build enough arc voltage to force the current down. The circuit’s L/R time constant matters too. A fuse rated at a given breaking capacity with a short time constant is not automatically rated for the same current on a slower, more inductive circuit.

Photovoltaic System Topology Diagram

Seven Checks Before Specifying a 2000V DC Fuse

  1. Voltage rating versus real operating voltage. Confirm the DC rating is at least the maximum open-circuit or float voltage, including temperature effects on the PV array or battery.
  2. Breaking capacity and time constant. Check the rated kA at the stated L/R value, and compare it with the prospective short-circuit current of your battery or DC bus.
  3. Class of operation. Semiconductor fuses are typically aR (partial-range). They protect against short circuits, so separate overload protection is needed.
  4. Let-through energy. Compare pre-arcing and operating I²t against what the protected semiconductor or cable can withstand.
  5. Power loss and derating. A fuse in an enclosed cabinet runs hot. Check watt loss and the manufacturer’s derating guidance.
  6. Approvals and standards. Ask for the certificate or file number, and check that it covers the exact part number family and rating.
  7. Mechanical fit. Confirm body size, mounting style, bolt size and torque, and compatibility with your busbar or fuse holder.

Table 1. 2000V DC fuse selection checklist

ParameterWhat to verifyWhy it matters
Rated DC voltageAt or above the maximum system voltageReliable arc extinction at full bus voltage
Breaking capacitykA value and the L/R time constant it was tested atMust exceed prospective fault current
ClassaR or gR/gS, per applicationDetermines overload coverage
Pre-arcing and operating I²tValues from the datasheetCoordination with semiconductors and cables
Power lossWatts at rated currentCabinet thermal design
ApprovalsUL file number, IEC or CE documentsCompliance with project requirements
MountingBolted or DIN style, torque, bolt sizeContact resistance and installation quality

HIITIO 2000V DC Fuse Range

HIITIO makes semiconductor and ESS fuses for high-voltage DC applications. Its product catalogue spans DC contactors, circuit breakers, isolation switches, surge protection devices and PV fuses. The company lists UL, CE, TUV, RoHS, REACH, IATF 16949 and ISO management system certifications on its website. For 2000V circuits, HIITIO offers two square body fuse families within its Square Body Series Fuse category.

HCBMG5 Series, 2000Vdc 1400-3000A (size 5#)

The 2000Vdc 1400-3000A DC Square Body ESS Fuse is designed for industrial energy storage systems. According to the product page:

  • Rated 2000Vdc maximum, with current options of 1400A, 1500A, 1600A, 1800A, 2000A, 2500A and 3000A.
  • Interrupting capacity of 2000Vdc / 100kA (L/R ≤ 5ms) and 1500Vdc / 250kA (L/R ≤ 5ms), with minimum breaking current of 3 × In and class aR.
  • Listed to UL Std 248-13 under UL File E533379. HIITIO’s company news announcement covers the certification, and the certificate PDF is linked from the product page.
  • Operating temperature from -40°C to +85°C, with RoHS compliance and a REACH declaration available on request.
  • Published pre-arcing I²t, maximum operating I²t and watt loss for every current rating. For example, the 2000A part lists 2,185,000 A²s pre-arcing, 9,800,000 A²s operating and 490W power loss. The 3000A part lists 7,695,000 A²s, 38,880,000 A²s and 580W.

Publishing these figures per rating makes coordination studies and thermal design much easier, because you don’t need to interpolate between sizes.

HCHVT2000 Series, 2000Vdc 250-800A

The 2000Vdc 250-800A Square Body Semiconductor Fuse (Fast Acting) covers the lower current range. From the product page:

  • Current ratings of 250A, 315A, 350A, 400A, 450A, 500A, 550A, 630A, 700A and 800A.
  • Rated breaking capacity of 100kA at 2000Vdc (time constant 10 to 15 ms) and 250kA at 1500Vdc (time constant ≤ 5 ms), class aR, minimum breaking current 3 × In.
  • Two mounting variants, bolted (B) and DIN style (U), with M10 bolts and 23.0 ± 1.0 N·m installation torque listed.
  • Referenced to UL 248-13 or IEC 60269-4 and RoHS compliant. The page does not list a UL file number for this series, so ask HIITIO for the current certification status of your exact part number.
  • Stated application as backup protection for DC relays and electrical energy storage. The page also notes the fuses can be applied in parallel to reach higher ampacity, within sizing guidelines.

Table 2. HIITIO 2000V DC fuse families at a glance

FeatureHCBMG5 (size 5#)HCHVT2000 (74E)
Rated voltage2000Vdc max2000Vdc
Current range1400-3000A250-800A
Breaking capacity at 2000Vdc100kA (L/R ≤ 5ms)100kA (time constant 10-15 ms)
Breaking capacity at 1500Vdc250kA (L/R ≤ 5ms)250kA (time constant ≤ 5 ms)
ClassaRaR
Standards referenceUL 248-13, UL File E533379UL 248-13 or IEC 60269-4 reference
MountingSquare body, per datasheet drawingBolted (B) or DIN (U)
Typical useIndustrial ESS, battery pack and DC busEnergy storage, DC relay backup protection

If your bus runs at 1500V instead, HIITIO also lists the 1500Vdc 250kA 400-2000A fast-acting fuse, and you can see the wider lineup on the ESS fuse page.

EXPLORE MORE HIITO PHOTOVOLTAIC SEMICONDUCTOR FUSE

Building the Rest of the DC Protection Chain

A fuse is one part of the protection scheme. For a complete 2000V-class design, also consider:

  • Isolation. A rated DC isolating switch lets technicians de-energize a circuit before servicing a fuse.
  • Switching and fault handling. HIITIO’s high voltage DC circuit breakers can complement fuses where resettable protection is preferred.
  • Surge protection. A high voltage DC surge protection device guards the bus against lightning and switching transients, which matters for outdoor solar and wind sites.
  • String-level protection. For PV strings upstream of the combiner, see the PV fuses category.

For system context, HIITIO’s energy storage system solution page shows how these components fit together.

Common Mistakes When Specifying High-Voltage DC Fuses

  • Using an AC rating for a DC circuit. DC interruption is harder, and the DC rating and time constant must be stated.
  • Ignoring the time constant. A kA figure without an L/R value is incomplete.
  • Assuming an aR fuse covers overloads. It doesn’t, so pair it with a breaker, contactor or BMS function.
  • Overlooking thermal effects. Enclosed cabinets raise the fuse’s operating temperature, which can affect its carrying capacity.
  • Skipping certification checks. Confirm the file number covers the exact series and rating you intend to buy.

VIEW HIITIO QUALITY TESTING LABORATORY

FAQ

Is a 2000V DC fuse the same as a 1500V fuse with a higher rating?
No. The body, element design and arc-quenching materials are engineered for a higher voltage, and the interrupting performance must be tested at that voltage. Always check the DC breaking capacity at 2000V specifically.

Can I use a 2000V fuse in a 1500V system?
Yes, in principle, because a fuse rated for a higher voltage can be used at a lower one. HIITIO’s datasheets list higher breaking capacity at 1500Vdc (250kA) than at 2000Vdc (100kA). Check the specific ratings and your fault current.

What does aR mean?
It denotes a partial-range fuse, designed to interrupt short-circuit currents above a minimum breaking current. It does not protect against low-level overloads, so a separate device is needed for that.

Does UL 248-13 cover 2000V DC fuses?
Per the CSA description of the harmonized standard, it applies to semiconductor fuses rated 2000V AC or DC or less. UL Listing is still product-specific, so check the file number for your part.

Where can I get a datasheet or certificate?
HIITIO publishes the specification and UL certificate PDFs on the HCBMG5 product page, and datasheets for other series are available in the download center.

Talk to HIITIO About Your 2000V DC Protection Design

Choosing a fuse for a 2000V solar, wind or storage system takes more than matching a voltage figure. HIITIO’s engineering team can help you compare breaking capacity, I²t, power loss and mounting options for your DC bus or battery rack. Browse the ESS fuse range, or send your system voltage, maximum current and prospective short-circuit level through the contact page. We’ll recommend suitable part numbers and share the datasheets and certificates for them.

Share on:

Contact Us

Get Reliable Electric Supplement Solutions for Your Project

TALK TO OUR EXPERT​

  • We will contact you within 12 hours
  • Don’t worry, we hate spam too!
  • 20

    Years of experience

    50+

    Countries & Areas

    500 +

    Customers

    30,000

    ㎡ Manufacturing Factory

    Download Our Catalog

    Surge-Protection-Device-SPD-Catalog-Datasheet-PDF

    TALK TO OUR EXPERT​

    Загрузите наш последний каталог продукции

    ОБЩАЙТЕСЬ С НАШИМ ЭКСПЕРТОМ

    • Мы свяжемся с вами в течение 12 часов
    • Не волнуйтесь, мы тоже ненавидим спам!

    20

    лет опыта

    50+

    Страны и регионы

    500 +

    Клиентов

    30,000

    ㎡ Производственная фабрика

    Download Our Latest Product Catalogue

    Download Our Latest Product Catalogue

    CONTACT US

    HIITIO logo full 300

    Talk to us now

    What products are you interested in?
    Just in case we can't get back to you in time